Log in
en | fr | nl

MicroSieve Technologies – High Frequency Flow Reversal for flat high performance membranes

Last updated 593 days ago by Albert Verver

logo

NL GUTS Group of Users of Technology for Separation in the Netherlands


  

20150210 MicroSieve Technologies GmbH (CH) – Mr. Franz Lieberman - “High Frequency Flow Reversal for continuous micro-, ultra- and nanofiltration with flat high performance membranes”

MicroSieve Technologies (MST) focuses on flat sheet micro-sieves with smooth surfaces and well defined straight pores and on maximizing the high fluxes these membranes in principle have. High fluxes cause rapid cake layer formation and flux decline.

MST developed the sieve vacuum cleaner (HFFR High Frequency Flow Reversal) that combines permeate flow reversal by frequent back pulses and cake layer removal through a suction slot rotating at the feed side of the micro-sieve. Membranes and HFFR are stacked to make modules. As only the cake layer with a bit of feed is removed little liquid (<1%) is lost.

Using the rotating slot abandons the necessity of pump energy to create shear forces, reducing power consumption, while maintaining high fluxes for beer, whey and milk between 5.000 and 25.000 l/(m².h.bar) at 0,2 bar feed pressure. MST cooperates with Aquamarijn in NL. www.microsieve.net

 


Join the NL GUTS LinkedIn community through : NL GUTS LinkedIn group
Visit the NL GUTS website www.processinnovation.nl/nlguts
For more information about NL GUTS please contact:
Jan Koning (chairman NL GUTS)
tel +32 473 976 135 - koning@trionpartners.nl
Bart Manders  (contact at RVO)
tel +31(0)88 602 2329 - bart.manders@rvo.nl